Fore Innovations fuel system electrical Upgrades
None
• 6 inches of insulated pump power wire protrude from top of hermetic seal with bare ends
• Wires for OE sensors (such as level, temperature) with bullet connectors to be reconnected to OE harness
Pump power pigtails only
• 2 pin genderless APP connectors are installed on all power wires on pump module
• Pigtails are 7 feet of bonded 12 AWG pump wire pairs, one pair for each pump
• 2 pin genderless APP connector assembled on each pump pigtail
FC2 Controller with wiring
• Includes pump power pigtails
• FC2 operates two pumps simultaneously, using OE or aftermarket switching signal
• Best for controlling two small fuel pumps for street duty, or two large fuel pumps for track use only
• May be used for driving two secondary pumps on triple module if primary pump can be run by OE harness
• Includes 80 amp inline fuse for main power wire
• Includes 6 AWG main power harness with APP connector, 14 feet of power wire, and 3 feet of ground wire
• Ring terminals included for main power and ground wires
• Honeywell pressure switch may be selected separately
FC3 Staged Controller with wiring
• Includes pump power pigtails
• FC3 operates secondary pump(s) independently from primary pump using with a secondary trigger source
• Best for controlling TWO or THREE large fuel pumps for street duty and minimizing heat
• Includes 100 amp inline fuse for main power wire
• Includes 4 AWG main power harness with APP connector, 14 feet of power wire, and 3 feet of ground wire
• Ring terminals included for main power and ground wires
• Honeywell pressure switch may be selected separately